Pump Saver / Antifreeze

Pump Saver / Anti Freeze

• The BE Pressure Washer Pump Saver is an essential tool for protecting your equipment and extending the life of your pressure washer pump.
• With a powerful yet eco-friendly formula, it offers industry-leading freeze protection, corrosion resistance, and seal lubrication — all in a quick and easy application.

Features

• All-Season Protection
  • Prevents freezing down to -50°F (-45°C), shielding internal pump components from cracking and damage during winter storage.
• Eco-Conscious Formula
  • Biodegradable and non-toxic, BE Pump Saver is safe for both users and the environment. It contains no harsh chemicals, making it safe to rinse away and easy to dispose of responsibly.
• Anti-Corrosion Agents
  • Protects internal metal surfaces and fittings from rust, oxidation, and hard water scale — even in humid storage environments.
• Seal Conditioner
  • Maintains the elasticity and integrity of O-rings, gaskets, and pump seals during long-term storage, reducing the risk of leaks or startup failures.
• Quick and Simple to Use
  • Attaches directly to the pressure washer inlet via standard hose fittings. One treatment takes less than a minute.
• Compatible with Most Brands
  • Works with BE, AR, CAT, General Pump, Comet, and virtually all other major pressure washer pumps.

How it Works

• After use, your pressure washer pump often retains small amounts of water. In cold weather, this residual moisture can freeze, expand, and fracture delicate components. Even in mild climates, stagnant water can corrode internal metal parts and degrade rubber seals.
• BE Pump Saver solves this with a unique two-in-one approach:
  • Displacement: The specially formulated fluid pushes out any remaining water from your pump system — even in hard-to-reach chambers.
  • Protection: It leaves behind a lubricating, non-freezing barrier that coats internal parts, preventing corrosion, mineral build-up, and seal deterioration.

• Your pump is now clean, conditioned, and protected until the next season.

Application Instructions

• Winterizing your pressure washer with BE Pump Saver is fast and easy. Follow these simple steps:
  • Turn off and disconnect your pressure washer from any water source and power supply.
  • Connect the Pump Saver container to your pressure washers' inlet (typically via a garden hose thread).
  • Press or squeeze the container until fluid begins to exit the high-pressure side of the pump.
  • Watch for foam or fluid discharge from the outlet — this indicates the pump is fully treated.
  • Disconnect the product, and your pump is now protected for the winter.

• For best results, use Pump Saver at the end of the season, before extended storage, or before freezing temperatures arrive.

Environmental Responsibility

• At BE Power Equipment, we believe protecting your equipment shouldn’t come at the cost of harming the environment. That’s why our Pump Saver formula is fully biodegradable, non-toxic, and free from phosphates, petroleum-based solvents, or other harsh chemicals.
• You can safely rinse away any leftover product without fear of contaminating soil or water systems, making it ideal for homeowners, professionals, and environmentally conscious users alike.

Ideal For

• Seasonal Equipment Storage: Perfect for pressure washers stored in garages, sheds, basements, trailers, or job sites where freezing conditions may occur.
• Rental & Commercial Use: Maintains reliability and performance of pressure washers used intermittently or across multiple job sites.
• Fleet Maintenance: Protects large quantities of pressure washers in municipal, contractor, and industrial settings.
• DIY Homeowners: Whether you wash your siding once a year or clean vehicles regularly, Pump Saver ensures your washer is ready when you need it.

Compatibility

• BE Pressure Washer Pump Saver is compatible with both gas and electric pressure washers. It works on units from all major manufacturers, including:
  • BE Power Equipment
  • AR (Annovi Reverberi)
  • CAT Pumps
  • General Pump
  • Comet
  • Simpson

• Ryobi, Greenworks, Sun Joe, and more
• If your pump has a standard garden hose or quick-connect fitting, BE Pump Saver will work.

Specifications

• • Freezing Point: -50°F (-45°C)
  • Size Options: Multi-pack bundles (Minimum Order 12)
  • Ingredients: Non-toxic propylene glycol base with corrosion inhibitors and rubber conditioners
  • Shelf Life: 2 years (store in a cool, dry location with cap tightly sealed)