2900 PSI - 15 LPM "SMART" Hot Water Blaster 3-Phase

3 Phase Power required

2900 PSI @ 15L/min.
Temp to 85º
Power: Three Phase
Nicolini Single Bearing Elec Motor 5.5kW
Stainless Coil
Stainless Chasis
Stainless fuel tanks
NMT1520 Hawk Pump
Low Pressure Detergent Injection
Coil Length: 26m
Coil Diam: 17cm x 3/8"

Features:

SMART range represents the new generation of stainless steel hot high Water Blasters.
430 stainless steel cover and frame
AUTOMATIC STOP standard.
Built-in fuel tanks.
Detergent suction and dispensing in low pressure.
Vertically boiler IN STAINLESS STEEL positioned with air cooling, cooling fan motor with independent control and adjustable combustion optimiser.
Bottom boiler in refractory cement (thickness of 4 cm), resistant to thermal shock.
Steel coil.

Safety equipment:
This safety system S.A.T. stops the machine after a few second after the release of trigger of the gun in order to avoid unnecessary interruption of the machine. To restart it, press the trigger of the gun.
This safety equipment DMA manages the absence of water stopping the machine and signalling it with a red light on the panel control. This system is really important because it will avoid that the pump works without water. 
This system stops the machine in case of temporary interruption of voltage.
This system will manage the absence of fuel by stopping the solenoid and the burner ignition and advising the problem with a red light on the panel control. 

Accessories included:
H.P. hose 5/16" 10 m, Water nozzle 25°, Gun with protection , Lance with detergent adjusting head

**Excludes three phase plug and fitting (due to site variations)